Engineering Project
Meadowlane Intermediate School — Central Energy Plant
- West Melbourne, Florida
- 116,700 SF
- Education / Institutional
- Mechanical + Plumbing Engineering

Project Overview
Meadowlane Intermediate School in West Melbourne, Florida is a 116,700-square-foot education building with classrooms, offices, a dining hall, a kitchen, and multipurpose space. BEED Engineering provided mechanical and plumbing engineering design and project administration.
The mechanical work did not stop at this building. A water-cooled central energy chiller plant was designed to serve three schools: Central Middle, Meadowlane Primary, and Meadowlane Elementary. The intermediate school is therefore both an occupied education building and the host of a campus chilled-water plant.
The Challenge
A school of this size needs classroom comfort, kitchen exhaust, and — in Florida — a ventilation strategy for hurricane-shelter use. Adding a central plant that also serves two neighboring schools raises the stakes: the hydronic design, air-handling layout, and controls have to work for more than one building.
The design had to:
- Provide a water-cooled central energy chiller plant with enough capacity and distribution for three campuses
- Serve classrooms, offices, dining, kitchen, and multipurpose space with variable air volume air-handling units and pressure-independent terminals
- Include HVAC controls that can run the plant and the air side as one system
- Ventilate hurricane-shelter occupancy when the building is used that way
- Provide kitchen hood exhaust, grease traps, and water-efficient plumbing fixtures
Those requirements are typical of larger education projects in West Melbourne and across Brevard County, where school buildings often share plant capacity instead of each carrying a standalone rooftop system.
BEED Engineering's Scope
BEED provided mechanical and plumbing engineering design services and project administration, including:
- Mechanical engineering for the water-cooled central energy chiller plant, VAV air-handling units, pressure-independent terminals, HVAC controls, hurricane-shelter ventilation, and kitchen hood exhaust
- Plumbing engineering for grease traps and water-efficient fixtures
- Project administration
Electrical engineering was not listed as part of this assignment.
Engineering Solutions
The water-cooled central energy chiller plant is the cooling source for Central Middle, Meadowlane Primary, and Meadowlane Elementary. Variable air volume air-handling units with pressure-independent air terminals condition the intermediate school’s occupied spaces. HVAC controls coordinate plant operation with terminal airflow.
Hurricane-shelter ventilation is included so the building can be used as a shelter without relying on the normal classroom outdoor-air sequence alone. Kitchen hood exhaust and grease traps serve the dining and kitchen areas. Water-efficient plumbing fixtures reduce domestic water use across the 116,700-square-foot building.
The mechanical room — air-handling equipment, insulated chilled-water piping, and supported hydronic mains — is the visible center of a plant that cools more than one school at a time.
Related BEED Services
Service
Mechanical Engineering
HVAC, chilled water, central plants, ventilation, humidity control, and building automation for commercial and institutional buildings.
Service
Plumbing Engineering
Domestic water, sanitary waste, storm drainage, medical gas, and natural gas systems for building projects.
Service
Chilled Water Systems
Chiller plants, pumping, air-handling equipment, and controls for larger commercial and institutional facilities.
Service
Central Plant Engineering
Central heating and cooling plants, thermal distribution, and plant optimization for campuses and large buildings.
Service
HVAC Engineering
Heating, ventilating, and air-conditioning design for occupant comfort, indoor air quality, and energy performance.
Service
Building Automation
Controls sequences, BAS architecture, and integration that make mechanical and electrical systems operate as designed.
Related Locations
Related Resources
What Is a Chilled Water System?
A chilled water system uses a chiller to cool water that is pumped to air-handling units and other coils, then returned to the plant to be cooled again.
What Is HVAC Engineering?
HVAC engineering is the design of heating, ventilating, and air-conditioning systems that control temperature, humidity, ventilation, and indoor air quality.
What Is Building Automation?
Building automation is the control system that starts, stops, sequences, and monitors HVAC and related equipment so a building operates as designed.
What Is Plumbing Engineering?
Plumbing engineering is the design of domestic water, sanitary waste, storm drainage, and specialty piping systems for buildings.
How Do You Choose an MEP Engineering Firm?
Choose an MEP engineering firm based on relevant project experience, local code familiarity, coordination ability, and how clearly the firm defines scope—not just the lowest fee.
Commercial HVAC Design: A Guide for Building Owners
A practical owner’s guide to commercial HVAC design decisions, from system type and humidity control to controls, maintenance access, and when to hire an engineer.
Related Projects

Education
Lake Nona Middle School
Orlando
Orlando, Florida
Mechanical + Plumbing Engineering
Mechanical and plumbing engineering and project administration for a 112,000-square-foot middle school in Lake Nona, Orlando, Florida, including ice storage and hurricane-shelter ventilation.
View Project →BEED Engineering
Education
Holly Hill Middle School
Holly Hill, Florida · Mechanical + Plumbing Engineering
Education
Holly Hill Middle School
LEED Silver Addition
Holly Hill, Florida
Mechanical + Plumbing Engineering
Mechanical and plumbing engineering for a 53,345-square-foot LEED Silver middle school addition in Holly Hill, Florida, including an air-cooled chiller plant and demand-based ventilation.
View Project →BEED Engineering
Education
Oviedo High School
Oviedo, Florida · Mechanical + Plumbing Engineering
Education
Oviedo High School
Campus Renovations
Oviedo, Florida
Mechanical + Plumbing Engineering
Mechanical and plumbing engineering and project administration for 400,000 square feet of high school renovations in Oviedo, Florida, including a water-cooled central chiller plant.
View Project →
Education
Reserve Center
West Palm Beach
West Palm Beach, Florida
Mechanical + Plumbing Engineering
Mechanical and plumbing engineering, LEED energy modeling, and project administration for a 60,000-square-foot Reserve Center in West Palm Beach, Florida.
View Project →Local Presence
BEED Engineering — Based in Palm Bay, Serving Central Florida
BEED Engineering is an MBE professional consulting engineering firm providing building mechanical, electrical, and plumbing (MEP) engineering design and consulting services. We are based in Palm Bay, Central Florida. BEED Engineering is a firm you can trust to get the job done.
Next Project
Have a Similar Engineering Project?
Talk with BEED Engineering about your next mechanical, electrical, plumbing, or education building systems project.
