Commercial Engineering Services
MEP Design
MEP design is the documented building-systems solution — calculations, coordinated drawings, and specifications that a contractor can bid, permit, and build.
Reviewed by
Michael K. Frempong, PE, LEED AP BD+C
President & Principal Engineer, BEED Engineering
Michael K. Frempong is a professional engineer and LEED AP BD+C accredited professional with over 20 years of experience in consulting engineering. As President & Principal Engineer at BEED Engineering, he leads the firm’s MEP design and consulting work for laboratory, healthcare, industrial, data center, education, commercial, municipal, and other building projects throughout Central Florida and the Treasure Coast.
View BEED team profileAbout BEED Engineering
BEED Engineering is an MBE professional consulting engineering firm providing building mechanical, electrical, and plumbing (MEP) engineering design and consulting services. We are based in Palm Bay, Central Florida.
At BEED Engineering, building energy efficiency is central to our work. We look for opportunities to design the most energy efficient, affordable, serviceable, and economic MEP systems for our clients.
Led by Michael K. Frempong, PE, LEED AP BD+C, president & principal engineer.
What BEED provides
BEED Engineering is an MBE professional consulting engineering firm providing building mechanical, electrical, and plumbing (MEP) engineering design and consulting services. We are based in Palm Bay, Central Florida. BEED provides commercial MEP design for new buildings and renovations, designing HVAC, electrical, and plumbing together so systems fit the architecture, structure, and the way the owner will operate the facility. At BEED Engineering, building energy efficiency is central to our work. We look for opportunities to design the most energy efficient, affordable, serviceable, and economic MEP systems for our clients.
HVAC and mechanical design
Load calculations, equipment selection, duct and piping distribution, and controls sequences.
Electrical design
Service sizing, distribution, lighting, generators, and fire alarm coordinated with mechanical loads.
Plumbing design
Domestic water, sanitary, storm, and specialty systems routed with the rest of the building.
Building systems coordination
A single design effort so mains, equipment rooms, and ceiling space are resolved on paper.
Permit-ready documents
Signed and sealed drawings prepared for commercial plan review.
Design during construction
Submittal review and field coordination after the design is issued.
What this work means
MEP design is the design of mechanical, electrical, and plumbing systems for a building. On commercial projects it is usually performed by a licensed engineering firm and results in construction documents. Building systems design includes more than equipment: distribution, controls, coordination, code compliance, and constructability.
Disciplines
Types of projects
- New commercial MEP design
- Renovation and tenant-improvement design
- Packaged HVAC and split-system replacements
- Chilled-water and central plant design
- Electrical service and generator design
- Medical gas and healthcare plumbing design
Why clients hire an engineering firm
- Commercial MEP design is a licensed engineering service, not a contractor takeoff.
- Building systems that are selected independently do not fit the same mechanical room or ceiling.
- Permit reviewers look for a coordinated set that matches occupancy, ventilation, and electrical load.
- Florida humidity and existing-building limits show up in the load calculation, not in the product brochure.
Industries served
Commercial
Building systems design constrained by existing structure, ceiling space, and electrical capacity.
Healthcare
MEP design that includes ventilation, medical gas, and reliable power as part of the same set.
Education
Campus MEP design, including phased replacements that keep buildings in operation.
Laboratory
Design for exhaust, compressed air, vacuum, and electrical loads that drive the architecture.
Food Service
Kitchen ventilation, gas, grease waste, and makeup air designed with the rest of the building.
Municipal
Public-building MEP design with an emphasis on maintainable equipment and clear documents.
Design process
- 1
Collect the constraints
Existing drawings, electrical service, structural limits, and owner criteria before system selection.
- 2
Select the systems
HVAC type, electrical distribution, and plumbing strategy that fit the occupancy and climate.
- 3
Coordinate the building
Route ducts, pipe, and conduit with structure and architecture so conflicts are designed out.
- 4
Issue a buildable set
Drawings, specifications, and sealed documents, then construction-phase support.
Deliverables
Service areas
Local engineering context for the markets BEED serves. These pages are written for specific communities, not generated as every service-city combination.
Brevard County
MEP Engineering in Brevard County, Florida
Mechanical, electrical, and plumbing engineering for commercial and institutional buildings throughout Brevard County.
Brevard County
MEP Engineering in Palm Bay, Florida
MEP engineering for commercial and institutional buildings in Palm Bay, where BEED Engineering is based.
Brevard County
MEP Engineering in Melbourne, Florida
Mechanical, electrical, and plumbing engineering for commercial, education, healthcare, and institutional buildings in Melbourne.
Treasure Coast
MEP Engineering in Port St. Lucie, Florida
MEP engineering for commercial, healthcare, and institutional buildings in Port St. Lucie.
Central Florida
MEP Engineering in Orlando and Central Florida
Mechanical, electrical, and plumbing engineering for commercial and institutional buildings in Orlando and Central Florida.
Related service pages
Service
MEP Engineering
BEED is an MEP engineering firm. We design and coordinate the mechanical, electrical, and plumbing systems that make commercial buildings occupiable, permittable, and operable.
Service
Engineering Design Services
BEED is a design engineering firm. We translate building program, codes, and existing conditions into coordinated mechanical, electrical, and plumbing construction documents.
Service
Engineering Services
BEED Engineering provides mechanical, electrical, plumbing, and building systems engineering services for commercial and institutional projects — from early planning through construction.
Related engineering questions
What Does MEP Engineering Include?
MEP engineering typically includes mechanical HVAC, electrical power and lighting, plumbing, and related life-safety and controls work required to design a complete building system package.
MEP Design Process for Building Owners
How MEP design typically moves from programming through construction documents and construction administration, and what owners should provide at each step.
What Is MEP Engineering?
MEP engineering is the coordinated design of mechanical, electrical, and plumbing systems that make a building usable, safe, and efficient.
What Are Engineering Design Services?
Engineering design services are the calculations, coordinated drawings, specifications, and sealed documents an engineering firm produces for a building project.
Related BEED Services
Common questions
What is the difference between MEP engineering and MEP design?
MEP engineering is the professional practice. MEP design is the work product: the calculations, drawings, and specifications. On commercial projects they are usually delivered by the same firm.
What is commercial MEP design?
It is building systems design for commercial occupancies — offices, healthcare, education, retail, and similar buildings — typically requiring sealed documents, coordination, and construction-phase support.
When should MEP design start?
Early enough to affect architectural layouts. Waiting until the floor plan is frozen is a common reason ducts, pipe, and structure collide in the ceiling.
Local Presence
BEED Engineering — Based in Palm Bay, Serving Central Florida
BEED Engineering is an MBE professional consulting engineering firm providing building mechanical, electrical, and plumbing (MEP) engineering design and consulting services. We are based in Palm Bay, Central Florida. BEED Engineering is a firm you can trust to get the job done.
BEED Engineering — Based in Palm Bay, Serving Central Florida
BEED Engineering Inc.
Palm Bay, FL
4680 Lipscomb Street NE, Suite 10H, Palm Bay, FL 32905
Need Engineering Help?
Need MEP design for a commercial building?
BEED Engineering designs mechanical, electrical, and plumbing systems for building projects throughout Brevard County, the Treasure Coast, and Central Florida.
Discuss Your Project →