Commercial Engineering Services
MEP Engineering
BEED is an MEP engineering firm. We design and coordinate the mechanical, electrical, and plumbing systems that make commercial buildings occupiable, permittable, and operable.
Reviewed by
Michael K. Frempong, PE, LEED AP BD+C
President & Principal Engineer, BEED Engineering
Michael K. Frempong is a professional engineer and LEED AP BD+C accredited professional with over 20 years of experience in consulting engineering. As President & Principal Engineer at BEED Engineering, he leads the firm’s MEP design and consulting work for laboratory, healthcare, industrial, data center, education, commercial, municipal, and other building projects throughout Central Florida and the Treasure Coast.
View BEED team profileAbout BEED Engineering
BEED Engineering is an MBE professional consulting engineering firm providing building mechanical, electrical, and plumbing (MEP) engineering design and consulting services. We are based in Palm Bay, Central Florida.
At BEED Engineering, building energy efficiency is central to our work. We look for opportunities to design the most energy efficient, affordable, serviceable, and economic MEP systems for our clients.
Led by Michael K. Frempong, PE, LEED AP BD+C, president & principal engineer.
What BEED provides
BEED Engineering is an MBE professional consulting engineering firm providing building mechanical, electrical, and plumbing (MEP) engineering design and consulting services. We are based in Palm Bay, Central Florida. MEP engineering is the core of the practice. Mechanical, electrical, and plumbing systems are designed as one coordinated building-systems effort for new construction, renovations, and existing-building upgrades across Brevard County, the Treasure Coast, and Central Florida.
MEP Design
Full-discipline building systems design from schematic design through construction documents.
Mechanical / HVAC
Cooling, ventilation, humidity control, chilled water, and building automation.
Electrical
Power distribution, lighting, generators, fire alarm, and low-voltage infrastructure.
Plumbing
Domestic water, sanitary, storm, medical gas, and fuel-gas systems.
MEP Coordination
Resolving conflicts between mechanical, electrical, plumbing, and structure before construction.
Construction Administration
Engineering support after bid so the installed systems match the design intent.
What this work means
MEP stands for mechanical, electrical, and plumbing. An MEP engineering firm designs those systems together so ducts, pipe, conduit, power, and life safety occupy the same building without field conflicts. Clients hire MEP consulting for commercial, healthcare, education, laboratory, and municipal projects that need sealed drawings and constructible design — not isolated equipment selections.
Disciplines
Types of projects
- New commercial and institutional buildings
- Medical office buildings and clinics
- Education and municipal facilities
- Laboratories and specialty occupancies
- Commercial renovations and tenant improvements
- Central plant, HVAC, and electrical service replacements
Why clients hire an engineering firm
- MEP is a coordination problem. Separate mechanical, electrical, and plumbing designers discover conflicts in the field.
- Most commercial building departments in Florida expect sealed MEP drawings for permit.
- Humidity, generator criteria, and existing-building capacity are local engineering issues, not generic templates.
- Owners need an engineer who will stay with the project through construction, not only through the permit stamp.
Industries served
Commercial
Building systems design for offices, retail, and mixed-use projects.
Healthcare
Clinics and medical buildings where HVAC, medical gas, and power reliability interact.
Education
School and campus MEP, including existing-building assessments and plant upgrades.
Laboratory
Coordinated exhaust, specialty plumbing, and electrical infrastructure.
Municipal
Public buildings that need maintainable MEP, not one-off equipment packages.
Data Centers
Cooling and power design for rooms where reliability is the occupancy.
Design process
- 1
Project definition
Confirm program, existing systems, utility service, and the owner’s performance criteria.
- 2
Coordinated schematic design
Select HVAC, power, and plumbing strategies that fit the same ceiling, roof, and electrical room.
- 3
Design development and documents
Size systems, route distribution, and produce a set a contractor can build.
- 4
Permitting and construction
Seal documents, review submittals, and observe work that affects system performance.
Deliverables
Service areas
Local engineering context for the markets BEED serves. These pages are written for specific communities, not generated as every service-city combination.
Brevard County
MEP Engineering in Brevard County, Florida
Mechanical, electrical, and plumbing engineering for commercial and institutional buildings throughout Brevard County.
Brevard County
MEP Engineering in Palm Bay, Florida
MEP engineering for commercial and institutional buildings in Palm Bay, where BEED Engineering is based.
Brevard County
MEP Engineering in Melbourne, Florida
Mechanical, electrical, and plumbing engineering for commercial, education, healthcare, and institutional buildings in Melbourne.
Treasure Coast
MEP Engineering in Port St. Lucie, Florida
MEP engineering for commercial, healthcare, and institutional buildings in Port St. Lucie.
Central Florida
MEP Engineering in Orlando and Central Florida
Mechanical, electrical, and plumbing engineering for commercial and institutional buildings in Orlando and Central Florida.
Related service pages
Service
MEP Design
MEP design is the documented building-systems solution — calculations, coordinated drawings, and specifications that a contractor can bid, permit, and build.
Service
Engineering Design Services
BEED is a design engineering firm. We translate building program, codes, and existing conditions into coordinated mechanical, electrical, and plumbing construction documents.
Service
Engineering Services
BEED Engineering provides mechanical, electrical, plumbing, and building systems engineering services for commercial and institutional projects — from early planning through construction.
Related engineering questions
What Is MEP Engineering?
MEP engineering is the coordinated design of mechanical, electrical, and plumbing systems that make a building usable, safe, and efficient.
What Does an MEP Engineer Do?
An MEP engineer designs mechanical, electrical, and plumbing systems, coordinates them with architecture and structure, and supports the project through permitting and construction.
When Do You Need an MEP Engineer?
Hire an MEP engineer when a project changes HVAC, power, plumbing, life-safety systems, occupancy, or when a building department requires sealed drawings.
How Much Does MEP Engineering Cost?
MEP engineering fees depend on building type, system complexity, renovation constraints, and the level of construction-phase services—not a single percentage that fits every project.
Related BEED Services
Service
Mechanical Engineering
HVAC, chilled water, central plants, ventilation, humidity control, and building automation for commercial and institutional buildings.
Service
Electrical Engineering
Power distribution, lighting, generators, fire alarm, and low-voltage systems for new construction and renovations.
Service
Plumbing Engineering
Domestic water, sanitary waste, storm drainage, medical gas, and natural gas systems for building projects.
Common questions
What does an MEP engineering firm do?
An MEP engineering firm designs the mechanical, electrical, and plumbing systems for a building, coordinates them with architecture and structure, and typically supports permitting and construction.
Is MEP engineering the same as HVAC design?
No. HVAC is part of mechanical engineering. MEP also includes electrical power, lighting, fire alarm, plumbing, and related building systems.
Does BEED provide MEP engineering in Brevard County and Port St. Lucie?
Yes. BEED is based in Palm Bay and provides MEP engineering throughout Brevard County, the Treasure Coast including Port St. Lucie, Orlando, and Central Florida.
Local Presence
BEED Engineering — Based in Palm Bay, Serving Central Florida
BEED Engineering is an MBE professional consulting engineering firm providing building mechanical, electrical, and plumbing (MEP) engineering design and consulting services. We are based in Palm Bay, Central Florida. BEED Engineering is a firm you can trust to get the job done.
BEED Engineering — Based in Palm Bay, Serving Central Florida
BEED Engineering Inc.
Palm Bay, FL
4680 Lipscomb Street NE, Suite 10H, Palm Bay, FL 32905
Need Engineering Help?
Need an MEP engineering firm for your project?
BEED Engineering provides MEP design and consulting for commercial and institutional buildings throughout Brevard County, the Treasure Coast, and Central Florida.
Discuss Your Project →