Engineering Project
Cape Canaveral Hospital — Women's Center
- Cocoa, Florida
- Healthcare
- Mechanical + Electrical + Plumbing
BEED Engineering
Healthcare
Cape Canaveral Hospital
Cocoa, Florida · Mechanical + Electrical + Plumbing
Project Overview
Cape Canaveral Hospital’s Women’s Center in Cocoa, Florida is an occupied hospital department. BEED Engineering provided MEP engineering design services to replace reheat coils, lighting fixtures, and plumbing fixtures.
This was a replacement assignment in an operating healthcare building, not a new hospital wing.
The Challenge
Reheat coils, lights, and plumbing fixtures in a women’s center have to come out and go back in without treating the floor as a vacant shell. The engineering had to coordinate those replacements as one MEP package.
The design had to:
- Replace reheat coils serving the Women’s Center
- Replace lighting fixtures
- Replace plumbing fixtures
BEED Engineering's Scope
BEED provided mechanical, electrical, and plumbing engineering design for the fixture and coil replacements. Construction administration was not listed as part of this assignment.
Engineering Solutions
The mechanical design addressed reheat coils in the Women’s Center HVAC. Electrical design covered lighting fixture replacement. Plumbing design covered fixture replacement. Those three replacements were issued as MEP engineering for an occupied hospital department in Cocoa, in Brevard County.
Related BEED Services
Service
MEP Engineering
Coordinated mechanical, electrical, and plumbing engineering for commercial, healthcare, education, and institutional buildings.
Service
Mechanical Engineering
HVAC, chilled water, central plants, ventilation, humidity control, and building automation for commercial and institutional buildings.
Service
Electrical Engineering
Power distribution, lighting, generators, fire alarm, and low-voltage systems for new construction and renovations.
Service
Plumbing Engineering
Domestic water, sanitary waste, storm drainage, medical gas, and natural gas systems for building projects.
Service
Healthcare Engineering
MEP design for clinics, hospitals, and other healthcare facilities with infection control and code-driven systems.
Service
HVAC Engineering
Heating, ventilating, and air-conditioning design for occupant comfort, indoor air quality, and energy performance.
Related Locations
Related Resources
What Is MEP Engineering?
MEP engineering is the coordinated design of mechanical, electrical, and plumbing systems that make a building usable, safe, and efficient.
What Is HVAC Engineering?
HVAC engineering is the design of heating, ventilating, and air-conditioning systems that control temperature, humidity, ventilation, and indoor air quality.
What Is Plumbing Engineering?
Plumbing engineering is the design of domestic water, sanitary waste, storm drainage, and specialty piping systems for buildings.
Do I Need an Engineer for a Commercial Renovation?
Many commercial renovations need an MEP engineer when HVAC, electrical, plumbing, occupancy, or life-safety systems change—or when sealed drawings are required for permit.
When Do You Need an MEP Engineer?
Hire an MEP engineer when a project changes HVAC, power, plumbing, life-safety systems, occupancy, or when a building department requires sealed drawings.
Related Projects
BEED Engineering
Healthcare
Cape Canaveral Hospital
Cocoa, Florida · Mechanical + Electrical Engineering
Healthcare
Cape Canaveral Hospital
Isolation Room Exhaust
Cocoa, Florida
Mechanical + Electrical Engineering
Mechanical and electrical engineering for a dedicated exhaust system serving an isolation room on the third floor of Cape Canaveral Hospital in Cocoa, Florida.
View Project →
Healthcare
Apollo Surgery Center
Surgical Facility Expansion
West Melbourne, Florida
Mechanical + Plumbing + Fire Protection
Mechanical, plumbing, and fire protection engineering for an 8,000-square-foot expansion of a surgical facility in West Melbourne, Florida.
View Project →Local Presence
BEED Engineering — Based in Palm Bay, Serving Central Florida
BEED Engineering is an MBE professional consulting engineering firm providing building mechanical, electrical, and plumbing (MEP) engineering design and consulting services. We are based in Palm Bay, Central Florida. BEED Engineering is a firm you can trust to get the job done.
Next Project
Have a Similar Engineering Project?
Talk with BEED Engineering about your next mechanical, electrical, plumbing, or healthcare building systems project.
